Bbarnett
Member
I am curious why my latches do not work and maybe someone here has some insight.
I have created two AOIs. One AOI latches an output on (ON). The other AOI unlatches an output (OFF).
The same output is set to both AOIs so that one AOI latches the output on and the other AOI unlatches the same output.
The ON AOI is read first.
When I run the routine, the output never turns on.
Is latching/unlatching the same output a shortcoming with AOIs? It's like the AOIs are treating this output as an OTE and not OTL/OTU.
I have created two AOIs. One AOI latches an output on (ON). The other AOI unlatches an output (OFF).
The same output is set to both AOIs so that one AOI latches the output on and the other AOI unlatches the same output.
The ON AOI is read first.
When I run the routine, the output never turns on.
Is latching/unlatching the same output a shortcoming with AOIs? It's like the AOIs are treating this output as an OTE and not OTL/OTU.