Hi There,
I have couple of Omron PLCs connected on my kepserverex and my intouch reads data from kepserverex. I have been observing that roughly at every 40 seconds connections drops and KepserverEx log an error sainyg 'Device is not connected'. and within few seconds it automatically gets connected logging the data in to the client. However, for the same time period, If i track the ping status of that particular device it responds correctly.
Tried every check with PLC settings as well as KepserverEx settings. Can anybody please help? It is happening for almost all the omron PLC.
I have couple of Omron PLCs connected on my kepserverex and my intouch reads data from kepserverex. I have been observing that roughly at every 40 seconds connections drops and KepserverEx log an error sainyg 'Device is not connected'. and within few seconds it automatically gets connected logging the data in to the client. However, for the same time period, If i track the ping status of that particular device it responds correctly.
Tried every check with PLC settings as well as KepserverEx settings. Can anybody please help? It is happening for almost all the omron PLC.