Hi, All
I have been tasked with uploading configs from two running Siemens PLCs. One from an ET200 and one from a S7-300. I have no real previous experience with PLCs and I have encountered a problem that I have been unable to solve.
I have managed to upload from the running PLCs via Upload to PG on Simatic Manager but I am having an issue when trying to save this project to a MMC. I am receiving an error message when trying to save to memory card, which states the file I am trying to save is too large for the MMC. I have a 128kb MCC and the file is 598kb. The MMC that is installed in the running PLC is also 128kb.
I am wondering if I am trying to save unnecessary files and if it is only the blocks that are required to be saved to the MMC. I have managed to copy and paste the blocks to the MMC but I receive an error message saying the SFB block is unable to be copied over. I am not confident that this card would work should it be required.
Any help would be greatly appreciated.
Thanks
I have been tasked with uploading configs from two running Siemens PLCs. One from an ET200 and one from a S7-300. I have no real previous experience with PLCs and I have encountered a problem that I have been unable to solve.
I have managed to upload from the running PLCs via Upload to PG on Simatic Manager but I am having an issue when trying to save this project to a MMC. I am receiving an error message when trying to save to memory card, which states the file I am trying to save is too large for the MMC. I have a 128kb MCC and the file is 598kb. The MMC that is installed in the running PLC is also 128kb.
I am wondering if I am trying to save unnecessary files and if it is only the blocks that are required to be saved to the MMC. I have managed to copy and paste the blocks to the MMC but I receive an error message saying the SFB block is unable to be copied over. I am not confident that this card would work should it be required.
Any help would be greatly appreciated.
Thanks