stephen99
Member
We use Kinetix 6000 systems in many different applications and would like to be able to report any drive errors on our front end. The errors I am talking about are the errors that show up on the front of the individual drives on the 7 segment LED. Currently we only get a generic Drive Fault message when an error occurs. This is captured in our Logix 5000 (ver16) program and then reflected in the front end. For instance, if we get an E34 error on a drive we would like to be able to report an E34 error on the front end but currently can only show a Drive Fault. Does anyone know if the error codes are captured by a register either in the individual drives or in the Kinetix module in the Logix rack?