I am working on setting up a Prosoft Datalogger model PLX51-DLplus-232. This unit will be collecting data from a SLC 5/05 on the DB9 port set to DF1. For testing i am utilizing a Micro 1100 since my spare SLC 5/04 doesn't want to let me download a fresh project to it for testing. In defense of the SLC it hasn't been plugged in for a couple of years and keeps giving me a comm fault mid download.
Now i realize a MicroLogix is not a SLC but it is my understanding that they act the same when it comes addressing and pulling data.
I have not been able to get the DF1 to communicate between the two modules. I am currently running a 1761-CBL-PM02/C from the Micro to a DB9 breakout board. On the breakout board i have jumpered pins 1,4,6 and 7,8 as per the drawing below:
I currently have the communications setup as follows:
Anyone have any ideas on what i must be missing?
Thank you!
Now i realize a MicroLogix is not a SLC but it is my understanding that they act the same when it comes addressing and pulling data.
I have not been able to get the DF1 to communicate between the two modules. I am currently running a 1761-CBL-PM02/C from the Micro to a DB9 breakout board. On the breakout board i have jumpered pins 1,4,6 and 7,8 as per the drawing below:
I currently have the communications setup as follows:
Anyone have any ideas on what i must be missing?
Thank you!