FactoryTalk View Studio, Panelview Plus 6 1000, Edit alarm message

Jako

Member
J
Join Date
Mar 2024
Location
Jylland
Posts
1
Hello,

I made a change in alarm setup in factory view studio, where I changed a alarm message text. After that I made a run application and downloaded it to the Panel and loaded the application on the panel. But when I activate the alarm, the old alarm message still shows up. When I check "current application" it is the new application which it is running. What am I doing wrong?
Hope you can help.

Best regards
Jakob
 

Similar Topics

C
FactoryTalk View Studio - Updating from MicroLogix to CompactLogix
Hello, I have a panelview plus that reads from 4 different PLC's. 2 of these used to be Micrologix PLC's and someone else went and updated them to...
Replies
3
Views
99
Jmeadows7676
Jmeadows7676
Z
FactoryTalk View Studio Emulation Connection to Real PLC Issue
Hi all, I'm having an issue with connecting View Studio emulation to a real PLC. I am running View Studio 8.01 on a Hyper-V virtual machine...
Replies
0
Views
286
zidanet
Z
M
FactoryTalk View Studio ME - BrokenLinkObject
Hello. I have a Project I'm doing in Factorytalk View Studio. One of my displays I created has a bunch of red x's on all of the objects I created...
Replies
7
Views
838
Pouyan3313
P
L
Different language layouts in FactoryTalk View Studio
So, I'm new to the PLC world (fresh graduate) and at my job I've been pretty much only helping out the other programmers with simpler tasks while...
Replies
1
Views
663
cardosocea
C
Scottryan03
Multilanguage Project - FactoryTalk View Studio
Good morning, I have a project coming up that will require my HMI runtime to toggle from English to Spanish via selector switch. What is the...
Replies
0
Views
480
Scottryan03
Scottryan03
Back
Top Bottom