AlfredoQuintero
Lifetime Supporting Member
A cry for help to parky and Mitsubishi gurus.
How do you confirm the firmware version of the iQR PLC or a module such as the RJ71GN11-T2? I have a setup here connected to GXWorks 3, and the different screens under Diagnostics show information about the CPU and the RJ71GN11-T2, but to my astonishment do not show the firmware version. Getting 'H0300A' error which suggests incompatibility between the CPU and the CC-Link IE TSN master module.
I downloaded the latest firmware for both of these products, because I purchased them through auction websites as there is no stock at Mitsubishi distributors (this is intended for development of field device, not for use in shop floor), so I suspect both modules firmware is very old.
I have never updated firmware of Mitsubishi PLC modules before. Can't see a firmware update option in GXWorks 3. If you can point me to the right path, will be very grateful.
Edit: This CPU does not have SD card slot.
How do you confirm the firmware version of the iQR PLC or a module such as the RJ71GN11-T2? I have a setup here connected to GXWorks 3, and the different screens under Diagnostics show information about the CPU and the RJ71GN11-T2, but to my astonishment do not show the firmware version. Getting 'H0300A' error which suggests incompatibility between the CPU and the CC-Link IE TSN master module.
I downloaded the latest firmware for both of these products, because I purchased them through auction websites as there is no stock at Mitsubishi distributors (this is intended for development of field device, not for use in shop floor), so I suspect both modules firmware is very old.
I have never updated firmware of Mitsubishi PLC modules before. Can't see a firmware update option in GXWorks 3. If you can point me to the right path, will be very grateful.
Edit: This CPU does not have SD card slot.
Last edited: