Communication of Parker SSD 590+

SaadJanjua

Member
S
Join Date
Jun 2021
Location
Pakistan
Posts
1
Hy everyone, I have Parker DC Drive (590+). in ints manual there is mentioned about P3 port which is based on (RS-232) communication. I want to know that can we use this port P3 for communication with Parker HMI TSI8006.
 

Similar Topics

V
application example for S7 300 olc communication with SSD 591+ Parker DC drive over PROFIBUS
Parker 590 drive to Siemens 300 over Profibus
Replies
1
Views
61
JRW
JRW
A
How to establish communication between MVI69-GSC with Parker HPC Servo drive
Hi, We are working now days to establish communication between Compact Logic PLC and Parker HPC Servo drive via Prosoft MVI69-GSC ASCII...
Replies
0
Views
4,303
AB2005
A
I
Communication issue
Hello there, I am having two plcs of mitsubishi (FX5U and R32ENCPU) and one GOT hmi (GS2110 WTBD-N) , I am able to ping all three devices from...
Replies
0
Views
8
Irfan_plus
I
B
Indradrive Cs/maCYmosBL (kistler) via sercos communication setup
Hi all, I have a studio 5000 project that incorporates a Rexroth Indradrive Cs servo amplifier, a Kistler Joiner, with a maXYmos measuring/control...
Replies
1
Views
36
dwoodlock
dwoodlock
A
1771-ASB Remote Rack Communication Status
I am working with a remote rack with a 1771-ASB adapter, and inside Logix 5000 I am trying to find where it displays the status of each of the...
Replies
8
Views
122
Jmeadows7676
Jmeadows7676
Back
Top Bottom