The matter is im facing a BB alarm while i try to communicate yaskawa A1000 & S7-300 by profibus PPO type 5 method.
I have changed my first control word into PQW30 and also i have transferred W#16#F into PQW30 inside of OB100.
My Drive parameters are as below.
F6-30 = 10
F6-32 = 0
H1-08 = 0F
B1-01=3
B1-02=3
Also please be good enough to check uploaded images below for my S7-300 configurations and result variable table.
I have changed my first control word into PQW30 and also i have transferred W#16#F into PQW30 inside of OB100.
My Drive parameters are as below.
F6-30 = 10
F6-32 = 0
H1-08 = 0F
B1-01=3
B1-02=3
Also please be good enough to check uploaded images below for my S7-300 configurations and result variable table.