Communication error

Fangarin

Member
Join Date
Jul 2014
Location
Tijuana, Baja California Norte
Posts
1
Hi, All

¿Could you help me?

I need to have communication with a Operator interface SOI-250-AB-120A-16K-485 by serial port of my computer.
I have a cable 2707-NC5 (converter RS 422/RS232) sc (spectrum controls).
I Have a programming software (SOI-SPS SOI-100/200 series programmer and loader version 3.0) but I don't have a good result.
The error is the next:
The version SPS don't support the protocol.
 
Hi fangarin,
a mi me aparece que tengo problema con el cable o la configuracion
estoy usando un cable cruzado en el puerto de impresion, el display tiene dos puertos
1-comm port (rs-485)
2-printer port (rs-232)
el tuyo es igual con dos puertos?
es la serie A2?
tambien baje el software v3 de SOI-SPS
pero no he podido
tienes el manual para este display?. porque solo encontre el SOI-260_guide pero solo muestra un sw1 y no el sw2 como que
es una nueva version.
 
Last edited:
Sorry guys
I have same HMI, but i have been trying to connect thru printer port (RS232)
and appears "Unable to communicate. Check cabling and configuration."
and I am asking him about if he has the operation manual to SOI-250
that's all.
 
Gracias por la respuesta pero no entendí bien, el producto es obsoleto, el fabricante ya no existe como tal, y la información de manuales o software mucho menos, en los comentarios veo que tienen o han logrado descargar la versión, por eso mi pregunta es donde encontraron la descarga o si alguno de ellos nos lo podrían facilitar??
 

Similar Topics

Hello all, I am currently trying to establish a message instruction to pass data from a 1756-L73 to a 1756-L71. My communication path from the...
Replies
8
Views
209
I am having trouble running the application throught my PLC, tm221me32tk with magelis HMIGTO6310 I have prepared the plc programme, also created...
Replies
0
Views
88
I don't know if this is the right place for the subject at least I'll try. The company has one of the oldest computers that is a master Windows...
Replies
5
Views
722
Hi there! I got a HMI terminal Panelview Plus 7 (PN-332439 / CAT 2711P-T12W21D8S) which work on a APP 8.00 i'm trying to modify with my FT View...
Replies
9
Views
630
Hello, We have several Yaskawa GA800's installed in our plant. They are all controlled via Ethernet and they work fine. However, they all get...
Replies
0
Views
435
Back
Top Bottom